Insert The Sd Memory Card; Remove The Sd Memory Card; Recommended Memory Cards - Hasselblad 907X Special Edition User Manual

I N SE RT TH E SD M E MORY CARD
Insert SD card
1 Open the battery and SD card lid by sliding it towards the
back of the camera and then rotate it outwards.
2 When the lid is opened, mount the SD card in the SD card
slot no 1 or no 2 (A) .
3 Close the lid by rotating it inwards and pushing it in place
towards the front of the camera (B) to lock it into position.
RE MOVE TH E SD M E MORY CARD
Note!
Do not remove a memory card from the camera if the Status
LED (C) is blinking as this can corrupt the files on the card and
result in data loss.
Remove SD card
1 Open the Battery and SD card lid .
2 Press the SD card a little way in and then release it. The SD
card will then move out from the SD card slot.
3 Grab the card and pull it away from the camera.
4 Close the lid by rotating it counter clockwise and pushing
it in place towards the front of the camera to lock it into
position.
RECOM M E N DE D M E MORY CARDS
For optimal performance, the following SD memory cards are
recommended to use:
Sandisk Extreme PRO UHS-II 300MB/s
●
Panasonic V90 UHS-II 280MB/s
●
Toshiba EXCERIA PRO UHS-II 270MB/s
●
SONY M UHS-II 260MB/s
●
Note!
Avoid using Micro SD/TF memory cards with SD card sets.
Some Sony high-speed G UHS-II SD 300MB/s memory cards
might have poor compatibility, and therefore, might not be
able to write image data properly. To avoid this, it is recom-
mended to use only the recommended SD memory cards, as
listed above, to ensure the image data security.
907X Special Edition USER GUIDE CONTENTS
USING THE 907X
A
B
2
1
C
www.hasselblad.com
63