18
20
21
19
22
Accessory connection
On the left hand side of the camera body are two accessory-retaining
screw threads (M5), as well as a databus connector, protected
beneath a cover.
The cover can be removed by inserting a pointed object, such as
a pen, in the small hole and then sliding it to the left, as in the il-
lustration. The cover-retaining clip can then also be removed to
access the connector.
PC-connector
A PC connector for non TTL-flash synchronisation is located on
the left side of the body. It is protected by a captive rubber plug.
Protective base plate
To attach the protective base plate, slip it over the camera foot
until it stops. To remove it, lift the securing catch while pushing
the plate back as in the illustration.
23
18, 19
20
21, 22