Test The Appliance Setup - Submit A Sample; Figure 26 - Threat Grid Portal Login Page - Cisco amp threat grid Setup And Configuration Manual

Cisco AMP Threat Grid Appliance Setup and Configuration Guide

TEST THE APPLIANCE SETUP - SUBMIT A SAMPLE

TEST THE APPLIANCE SETUP - SUBMIT A SAMPLE
Once the Threat Grid Appliance is updated to the current version, the final test that your appliance has
been configured properly is to submit a malware sample using the Threat Grid software.
Sign into the AMP Threat Grid Portal by visiting the address you configured as the Clean interface. The
1.
Threat Grid login page opens:

Figure 26 - Threat Grid Portal Login Page

Enter the default Login and Password: admin/changeme
2.
Click Login. The main Threat Grid Sample Analysis page opens.
3.
In the Submit a Sample box located in the upper-right corner, to select a sample file or enter a URL to
4.
submit for malware analysis.
Click Upload Sample. The Threat Grid sample analysis process is launched.
5.
You should see your sample going through several stages of analysis. During analysis, the sample is
listed in the Submissions section. Once analysis is completed, the results should be available in the
Samples section, with details in the Analysis Report.
41