Table of Contents
Advertisement
Cisco AMP Threat Grid Appliance Setup and Configuration Guide
CONFIGURATION WIZARD - OPADMIN PORTAL
CONFIGURATION WIZARD - OPADMIN PORTAL
The OpAdmin Portal is the Threat Grid administrator's portal on the appliance. It is a Web user interface
that can be used once an IP address has been configured on the Admin interface.
The OpAdmin Portal is the recommended tool for configuring your appliance, and in fact, much of the
appliance configuration can only be done via the OpAdmin portal interface, including:
OpAdmin Portal administrator's password
•
Email servers
•
DNS servers
•
NTP servers
•
SSL Certificates
•
Other server settings
•
https://<adminIP>/ OR https://<adminHostname>/
•
Note:
Not all of these settings are completed in the initial OpAdmin portal configuration wizard workflow.
Some, such as SSL Certificates, are configured in separate steps, as described in the Threat Grid
Appliance Administrator's Guide.
Configuration Workflow
The steps in the following sections should be completed in one session to reduce the chance of an
interruption to the IP address during configuration.
Login to the OpAdmin Portal
Point your browser at the OpAdmin Portal interface (the Admin URL with the "https"). The Threat Grid
1.
OpAdmin login screen opens:
26
Advertisement
Table of Contents
