Appliance Build Number/Version Lookup Table - Cisco amp threat grid Setup And Configuration Manual

Cisco AMP Threat Grid Appliance Setup and Configuration Guide
INSTALLING THREAT GRID APPLIANCE UPDATES

Appliance Build Number/Version Lookup Table

The build number of an Appliance can be viewed on the Updates page (OpAdmin Operations > Update
Appliance), as illustrated above. Appliance build numbers correspond to the following version numbers:
Build Number
2016.05.20170308211223.c92516ee.rel
2016.05.20170303034712.1b205359.rel
2016.05.20170105200233.32f70432.rel
2016.05.20161121134140.489f130d.rel
2016.05.20160905202824.f7792890.rel
2016.05.20160811044721.6af0fa61.rel
2016.05.20160715165510.baed88a3.rel
2016.05.20160706015125.b1fc50e5.rel-1
2016.05.20160621044600.092b23fc
2015.08.20160501161850.56631ccd
2015.08.20160315165529.599f2056
2015.08.20160217173404.ec264f73
2015.08.20160211192648.7e3d2e3a
Release Release Date
Version
2.2mfg 3/8/2017
2.2 3/3/2017
2.1.6 1/7/2017
2.1.5 11/21/2016
2.1.4 9/5/2016
2.1.3 8/11/2016
2.1.2 7/15/2016
2.1.1 7/6/2016
2.1 6/21/2016
2.0.4 5/1/2016
2.0.3 3/15/2016
2.0.2 2/18/2016
2.0.1 2/12/2016
38
Notes
Manufacturing-only
changes. No
customer impact. Not
deployed via update
server.
Storage migration,
Pruning, Mask UI,
Multi-disposition
update
LDAP Authentication
support for
OpAdmin/tgsh-dialog
ElasticSearch5; CSA
performance fix
Primarily of interest to
Manufacturing
Offline update
support key, M4 wipe
support
Starting point for the
2.1 update. You must
be at 2.0.4 before you
can update to 2.1.
Introduces AMP
integration, CA
mgmt., and split DNS