Cisco amp threat grid Setup And Configuration Manual page 44

Cisco AMP Threat Grid Appliance Setup and Configuration Guide
INSTALLING THREAT GRID APPLIANCE UPDATES
Build Number
2015.08.20160131061029.8b6bc1d6
2014.10.20160115122111.1f09cb5f
2014.10.20151123133427.898f70c2
2014.10.20151116154826.9af96403
2014.10.20151020111307.3f124cd2
2014.10.20150904134201.ef4843e7
2014.10.20150824161909.4ba773cb
2014.10.20150822201138.8934fa1d
2014.10.20150805134744.4ce05d84
2014.10.20150709144003.b4d4171c
2014.10.20150326161410.44cd33f3
2014.10.20150203155143+hotfix1.b06f7b4f
2014.10.20150203155142.b06f7b4f
2014.10.20141125162160+hotfix2.8afc5e2f
2014.10.20141125162158.8afc5e2f
Note: For release versions 1.0-1.2 a reboot may be needed if an interface was not plugged in at boot time.
This is a pre-v1.3 issue, except for any interface requiring an SFP, which will still needs to be plugged in at
boot time post v1.3. The network cable plugged into the SFP may be hot-plugged safely.
Release Release Date
Version
2.0 2/11/2016
1.4.6 1/27/2016
v1.4.5 11/25/2015
v1.4.4
v1.4.3
v1.4.2
v1.4.1
v1.4
v1.3
v1.2.1
v1.2
v1.1+hotfix1
v1.1
v1.0+hotfix2
NOTE: The
1.0+hotfix2
is a
mandatory
update that
fixes the
update
system itself
to be able to
handle large
files without
breaking.
v1.0
39
Notes
Force update to 2.0.1
from here
Starting point for the
2.0.4 update