Figure 28 - Cimc Configuration Utility - Cisco amp threat grid Setup And Configuration Manual

Cisco AMP Threat Grid Appliance Setup and Configuration Guide
APPENDIX A – CIMC CONFIGURATION (RECOMMENDED)

Figure 28 - CIMC Configuration Utility

3. In the CIMC configuration utility, set up an IP address that will be used for remote server management.
When complete, Save, and then Exit.
4.
At this point the server can be managed remotely by using a Web browser to https://<CIMC-IP
address>/
5. The initial user name is "admin", with a password of "password".
44