Figure 4 - Cisco Ucs C220 M3 Rear View Details - Cisco amp threat grid Setup And Configuration Manual

Cisco AMP Threat Grid Appliance Setup and Configuration Guide
SERVER SETUP

Figure 4 - Cisco UCS C220 M3 Rear View Details

Note: For releases 1.0-1.2 a reboot may be needed if an interface was not plugged in at boot time. This is
a pre-1.3 issue, except for any interface requiring an SFP, which will still needs to be plugged in at boot
time post 1.3. The network cable plugged into the SFP may be hot-plugged safely.
13