Figure 9 - Tgsh Dialog - Cisco amp threat grid Setup And Configuration Manual

Cisco AMP Threat Grid Appliance Setup and Configuration Guide
SERVER SETUP
Note: If you want to configure this interface, press F8 after the memory check is completed, and follow the
instructions provided in the section, CONFIGURING CIMC (Optional).
The TGSH Dialog is displayed on the console when the server has successfully booted up and connected:

Figure 9 - TGSH Dialog

The Admin URL shows as unavailable - the network interface connections are not yet configured and the
OpAdmin Portal cannot be reached yet to perform this task.
Note: Make a note of the administrator Password into a separate text file for convenience (copy-paste)
during the OpAdmin Portal configuration steps.
IMPORTANT: The TGSH Dialog displays the initial administrator password, which will be needed in order to
access and configure the OpAdmin Portal interface later in the configuration workflow steps.
19