Operation - Bosch MUM44 Series Instruction Manual

Operation

W Risk of injury!
Do not insert mains plug until all preparations
for working with the appliance are complete.
Attention!
Do not operate the appliance without an
accessory / tool in the operating position.
Do not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwave­safe.
■ Before operating the appliance
and accessories for the first time,
clean t horoughly; see "Cleaning and
servicing".
Preparation
■ Place the base unit on a smooth, clean
surface.
■ Unwind / pull out the cord.
X Fig. B
■ Insert the mains plug.
Stirrer, whisk and kneading hook
X Figure D:
Stirrer (6a)
for stirring dough, e.g. cake mixture
Whisk (6a)
for whisking egg whites, cream and
light dough, e.g. sponge mixture
Kneading hook with dough
deflector (6b)
for kneading heavy dough and
mixing­in ingredients that ought not
be cut (e.g. raisins and chocolate chips)
W Risk of injury from the rotating tools!
While the appliance is operating, keep
fingers clear of the mixing bowl. Do not
change tools until the drive has come to a
standstill ­ when the appliance is switched
off, the drive continues running briefly.
The appliance may only be operated when
the unused drives have been safeguarded
with the drive covers.
■ Set rotary switch to Ö and hold in
place until the drive stops.
Note: If the drive does not move, the swivel
position has already been reached.
MUM44_8001056867.indb 17
■ Press the Release button and move the
swivel arm to position 6.
■ Insert the bowl. The base of the mixing
bowl must be inserted into the recess of
the base unit.
■ Depending on the processing task,
insert the stirrer, whisk or kneading
hook until it locks into position. If using
the kneading hook, rotate the dough
deflector until the kneading hook can
lock into position.
■ Put the ingredients to be processed into
the bowl.
■ Press the Release button and move the
swivel arm to position 1.
■ Attach the cover.
■ Set the rotary switch to the desired
setting.
Adding more ingredients
■ Switch off the appliance with the rotary
switch.
■ Set rotary switch to Ö and hold in
place until the drive stops.
■ Remove lid.
■ Press the Release button and move the
swivel arm to position 7.
■ Add ingredients
or
■ add more ingredients through the feed
tube in the cover.
After using the appliance
■ Switch off the appliance with the rotary
switch.
■ Set rotary switch to Ö and hold in
place until the drive stops.
■ Remove mains plug.
■ Remove lid.
■ Press the Release button and move the
swivel arm to position 6.
■ Take the tool out of the drive.
■ Remove the bowl.
■ Clean all parts. X "Cleaning and
servicing" see page 18
en
Operation
17
25.01.2017 10:07:02