Cleaning And Servicing - Bosch MUM44 Series Instruction Manual

en
Cleaning and servicing
Blender
X Figure E
W Risk of injury from sharp blades /
rotating drive!
Never place fingers in the attached blender!
Do not remove / attach the blender until
the drive is at a standstill! Operate the
assembled blender only and with the lid
attached.
W Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Add a max.
0.5 litres of hot or frothing liquid.
Warning!
Blender may be damaged. Do not process
deep­frozen ingredients (except ice cubes).
Do not operate when empty.
Warning!
Processing liquids in the glass blender:
maximum setting 3. Add a max. 0.5 litres of
hot or frothing liquid.
■ Press the Release button and move the
swivel arm to position 3.
■ Remove the blender drive cover.
■ Attach the blender jug (mark on the
base of the blender jug on the mark
on the base unit) and rotate as far as
possible in an anti­clockwise direction.
X Fig. E-4/5
■ Add ingredients.
Maximum capacity of liquid for plastic
blender = 1 litre,
for glass blender = 0.75 litres,
frothing or hot liquid maximum 0.5 litres
Optimal processing capacity – solids
= 50­100 g.
■ Attach lid and press firmly. While
working, always hold the lid firmly with
one hand. However, do not place hand
over the refill opening!
■ Set the rotary switch to the desired
setting.
18
MUM44_8001056867.indb 18
Adding more ingredients
X Figure E-6
■ Switch off the appliance with the rotary
switch.
■ Remove the cover and add ingredients
or
■ remove the funnel and gradually add
solid ingredients through the feed tube
or
■ pour liquid through the funnel.
After using the appliance
Switch off the appliance with the rotary
switch.
■ Remove mains plug.
■ Rotate the blender in a clockwise
direction and remove.
Tip: It is recommended to clean the blender
immediately after use.

Cleaning and servicing

Attention!
Do NOT use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit
W Risk of electric shock!
Never immerse the base unit in water or
place under running water.
■ Remove mains plug.
■ Wipe the base unit with a damp cloth.
If required, use a little detergent.
■ Then dry the base unit.
Cleaning the bowl and
accessories
All parts are dishwasher­safe. Do not
wedge plastic parts in the dishwasher as
they could warp.
Cleaning the blender
W Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. The blender can be disassembled
for cleaning.
Warning!
Do NOT use abrasive cleaning agents. The
blade insert is not dishwasher­safe. Clean
the blade insert under running water only.
25.01.2017 10:07:03