Introduction; Revision History; List Of Changes; Trademark Information - ADC OptEnet User Manual

ADCP-92-047 • Issue 1 • January 2004

INTRODUCTION

This user manual provides descriptions, specifications, and power-up instructions for the
OptEnet Set Top Optical Media Converter with optical to optical conversion capabilities.

Revision History

ISSUE DATE
1 01/2004

List of Changes

PAGE
All

Trademark Information

ADC is a registered trademark of ADC Telecommunications, Inc.; OptEnet is a trademark of
ADC Telecommunications, Inc.

Admonishments

Important safety admonishments are used throughout this manual to warn of possible hazards to
persons or equipment. An admonishment identifies a possible hazard and then explains what
may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use of
the triangular alert icon (seen below), and are listed in descending order of severity of injury or
damage and likelihood of occurrence.
Danger: Danger is used to indicate the presence of a hazard that will cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Warning: Warning is used to indicate the presence of a hazard that can cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Caution: Caution is used to indicate the presence of a hazard that will or can cause minor
personal injury or property damage if the hazard is not avoided.

General Safety Precautions

Warning: To prevent electrical shock, never install chassis in a wet location or during a
lightning storm. When installing or modifying telephone lines, disconnect lines at the network
interface before working with uninsulated lines or terminals.
Page 2
© 2004, ADC Telecommunications, Inc.
REASON FOR CHANGE
Preliminary Publication
IDENTIFIER DESCRIPTION OF CHANGE
– New publication