Front turn signal lights
Front parking lights
1. Remove screws holding the lens and re-
move lens.
2. Remove bulb from bulbholder and fit new
bulb.
3. Reinstall lens, tighten screws. Check func-
tioning of light.
4. Install plastic trim and tighten retaining
screws.
Additional stop light
1. Remove Phillips screws from light unit and
remove unit.
2. Lightly pull lens out and replace defective
bulb.
3. Check functioning of light.
4. Reinstall lens and light unit. Tighten retai-
ning screws.
93