Table of Contents
Advertisement
• To unfasten belt, push in release button on
buckle. Belt tongue will spring out of buckle.
• To release a locked belt, lean back to take
the body pressure off the belt.
• To store lap/shoulder belt, allow belt to wind
up on retractor as you guide latch to its
stowed position on doorpost.
Lap belts for rear seats
The belt with inertia reel locking mechanism
adjusts automatically to your size and move-
ments as long as the pull on the belt is slow.
Rapid deceleration during hard braking or a
collision locks the belt. The belt will also lock
when you drive up or down a steep hill or in a
sharp curve.
• To fasten lap belt, grasp latch on outboard
side of seat and slowly pull across the pel-
vis. Insert belt tongue into buckle on inboard
side of seat and push down until it securely
locks with an audible click. Pull belt to
check. To unfasten belt, push in release
button on the buckle.
• To store belt, allow belt to wind up as you
guide latch to retractor.
23
Advertisement
Table of Contents
