Tail lights
The tail lights are housed in one unit.
A - tail lights
B- stoplight
C - turn signal light
D - back-up light
92
1. Remove tool tray from the rear cross wall
inside luggage compartment.
2. U s e the spark plug spanner to unscrew the
hex nut (arrowed) which holds the tail
light unit in place and remove the unit from
the rear bumper.
3. Turn holder of defective bulb anticlockwise
to limit stop and remove bulbholder.
4. Remove bulb from bulbholder and fit new
bulb. Reinstall bulbholder and turn clock-
wise to limit stop.
5. Install tail light unit in bumper and tighten
retaining nut.
Do not overtighten.
6. Check function of light.