Porsche 92854 Owner's Manual page 19

Seat position regulation
The seat position memory can store up to
three different sitting positions for the driver's
and passenger seats. Each position stored
in the memory comprises longitudinal adjust-
ment, seat height, backrest angle, position
and size of lumbar support and the position
of the outside mirrors. The positions can be
adjusted, stored or called up regardless of
whether the engine is on or off.
18
Selecting a position
Adjust the seat and the two outside mirrors
to the desired position by operating the
switches for seat and mirror adjustment.
Storing a position
To store a position in the memory, press the
memory button (arrowed) and the approp-
riate position button (button 1, 2 or 3). The
memory button must be pressed before the
position button.
Calling up a position
To set the seat to the position stored in the
memory , the appropriate position button m u s t
be depressed until the seat reaches its final
position. The procedure is curtailed as soon
as the button is released. The buttons are
illuminated for ease location.
Once the seat reaches its end position the
mirrors are set automatically to the positions
stored in the memory.
The seat switches always take priority
over automatic adjustment. If a seat switch
is operated, automatic adjustment is im-
mediately interrupted.
Pilot lamp
A red pilot lamp is set in the memory button.
If adjustment is initiated, the pilot lamp lights
up until the adjustment is completed. If the
procedure is interrupted, the lamp remains
lit and goes out only some 60 seconds after
the ignition is switched off.