Product Overview; Unit Range - ABB DCS 600 Manual

1 DCS 600 MultiDrive - a new generation of power converters
R
NRTL /C
state-of-the-art technology
flexible design
user-friendliness
ABB’s long years of experience with variable-
speed DC drives, plus use of the latest state-of-
the-art technologies, have combined to create
this new product. The DCS 600 MultiDrive con-
stitutes a complete program for ratings between
25 A and 5150 A as a power converter module,
suitable for all commonly used three-phase sys-
tems.
Our products of course have
also comply with the stipulations laid down in the
ISO 9001
DIN EN quality management system.
DCS 500 Drives are approved according to CSA
C S A
( anadian tandards ssociation) and NRTL /C.
DCS 600 MultiDrive converter units are suitable
for system drive applications.
PC programs
Appropriate
are human-engineered for user-friendly operator
control.

Unit range

The range comprises of 4 sizes, C1, C2, C3 and C4.
We can deliver both modules and standard
cubicles in MNS-design.
C1 - Module Switchgear cubicle
Basic hardware complements
CE approvals
, and
Additional components for integration in the
module
Moreover, the accessories listed below can be
used to individually customize the drive package
in accordance with the application intended
ensure that the drives
Thyristor bridge(s) (from 900 A with leg fuses
installed)
Temperature monitor for the thyristor bridge(s)
Fan
Power supply for the electronics
Microprocessor board
A M
AMC ( pplication otor
D S P
DSP ( igital ignal rocessor) for drive con-
trol and DDCS link
Field supply converter
– uncontrolled full wave diode bridge, 6A or
– half-controlled diode/thyristor bridge, 16A
Control panel
External field supply units
12-Pulse parallel configuration
12-Pulse serial configuration
Additional I/O boards
Interface modules for various communication
protocol
EMC filter(s)
PC programs
II F 1-1
C
ontrol) board with