Set Tcp/Ip Protocol For Working With Nat Router - LevelOne WBR-2401 User Manual

5. Select Microsoft item in the manufactures list. And choose TCP/IP in the Network Protocols. Click
OK button to return to Network window.
6. The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install
procedure and restart your PC to enable the TCP/IP protocol.
A.2 Set TCP/IP Protocol for Working with NAT Router
1. Click Start button and choose Settings, then click Control Panel.
2. Double click Network icon. Select the TCP/IP line that has been associated to your network card in
the Configuration tab of the Network window.
3. Click Properties button to set the TCP/IP protocol for this NAT Router.
91