Descriptions Of Major Functions; Switching To Cv612Ht-4K; Setting The Digital Output (Rgb, Yuv); Enabling The Tally Mode Function - Marshall Electronics CV612HT-4K Installation Manual

Descriptions of Major Functions

6.1 Switching to CV612HT-4K

1. Press [Camera 1 ~ 3] on the remote control to select CV612HT-4K.
 Camera 1 ~ 3 is selected with IR SELECT.

6.2 Setting the Digital Output (RGB, YUV)

1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [System].
3. Press [ENTER] to activate.
4. Press [] or [] to select [Digital Output].
5. Press [ENTER] to activate.
6. Press [] or [] to select [YUV / RGB].
7. Press [MENU] to exit.

6.3 Enabling the Tally Mode function

1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [System].
3. Press [ENTER] to activate.
4. Press [] or [] to select [Tally Mode].
5. Press [ENTER] to activate.
6. Press [] or [] to select [Low / High / Off].
7. Press [MENU] to exit.

6.4 Hiding the preset image switch (Motionless Preset)

1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [System].
3. Press [ENTER] to activate.
4. Press [] or [] to select [Motionless Preset].
Marshall Electronics
26