Problems With Vsm-Vem Layer 2 To 3 Conversion Tool - Cisco Nexus 1000V Troubleshooting Manual

Problems with VSM-VEM Layer 2 to 3 Conversion Tool

You have completed this procedure. Return to the
Step 4
section on page
Problems with VSM-VEM Layer 2 to 3 Conversion Tool
The following is a symptom and solution for a problem with logging in to VSM when using the
conversion tool:
Symptom
When you enter your VSM and VC login
credentials for the first time, the VSM-VEM
Layer 2 to 3 Conversion Tool might display:
Timeout error. Is device down or
unreachable?? ssh_expect
Upgrade Troubleshooting Commands
You can troubleshoot problems related to upgrades.
Command
show boot
show module
show running-config | include boot
show startup-config | include boot
show svs connections
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
5-16
5-12.
"Recovering a Primary VSM with Active Secondary"
Solution
Open a command line window and run an ssh
1.
command on the VSM (ssh
username@vsmIPaddress).
When prompted,
2.
Are you sure you want to
continue connecting?
3. Rerun the VSM-VEM Layer 2 to 3
Conversion Tool by reopening the .bat file.
Ensure that the error does not reappear.
Description
Displays boot variable definitions, showing the
names of software images used to boot the VSM.
See Example 5-2 on page
Displays module status for active and standby
VSMs.
See Example 5-4 on page 5-17
See Example 5-4 on page
Displays the boot variables currently in the
running configuration.
See Example 5-5 on page
Displays the boot variables currently in the
startup configuration.
See Example 5-6 on page
Displays the current connections between the
VSM and the VMware host server.
See Example 5-7 on page
Chapter 5 Upgrades
, enter yes.
5-17.
(ISSU).
5-17.
5-18.
5-18.
5-18.
OL-31593-01