Cisco Nexus 1000V Troubleshooting Manual page 122

Port Troubleshooting Commands
Command
show module module-number
show svs domain
show svs connections
show cdp neighbors
show port internal event-history interface
show logging logfile
show logging logfile | grep interface_number
show interface brief
show interface ethernet
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
9-10
Purpose
Displays the state of a module.
See Example 9-1 on page
Displays the domain configuration.
See Example 9-2 on page
Displays the Cisco Nexus 1000V connections.
See Example 9-3 on page
Displays the neighbors connected to an interface.
See Example 9-4 on page
Displays information about the internal state
transitions of the port.
See Example 9-5 on page
Displays logged system messages.
See Example 9-6 on page
Displays logged system messages for a specified
interface.
See Example 9-7 on page
Displays a table of interface states.
See Example 9-8 on page
Displays the configuration for a named Ethernet
interface, including the following:
Administrative state
•
Speed
•
• Trunk VLAN status
• Number of frames sent and received
• Transmission errors, including discards,
errors, CRCs, and invalid frames
See Example 9-9 on page
See Example 9-10 on page
Chapter 9 Ports
9-11.
9-12.
9-12.
9-12.
9-12.
9-12.
9-13.
9-13.
9-13.
9-13.
OL-31593-01