Cisco Nexus 1000V Troubleshooting Manual page 123

Chapter 9 Ports
Command
show interface ethernet counters
show interface vethernet
show interface status
show interface capabilities
show interface virtual port mapping
module vem execute vemcmd show portsec
status
show port-security interface veth
show port -security address interface vethernet Displays information about secure addresses on
For detailed information about show command output, see the Cisco Nexus 1000V Command Reference.
EXAMPLES
Example 9-1
switch# show mod 3
Mod
---
3
Mod
---
3
Mod
---
OL-31593-01
show module Command
Ports Module-Type
----- -------------------------------- ------------------ ------------
248 Virtual Ethernet Module
Sw Hw
-------------- ------
NA 0.0
MAC-Address(es)
--------------------------------------
Purpose
Displays port counters for identifying
synchronization problems.
For information about counters, see the
"Information About Interface Counters" section
on page 9-2.
See Example 9-11 on page
Displays the vEthernet interface configuration.
See Example 9-12 on page
Displays the status of the named interface.
Displays a tabular view of all configured port
profiles.
See Example 9-13 on page
Displays the virtual port mapping for all vEthernet
interfaces.
See Example 9-14 on page
Displays the port security status of the port. If
enabled, the output shows an LTL connected to the
VM network adapter.
See Example 9-15 on page
Displays secure vEthernet interfaces.
an interface.
See Example 9-17 on page
Model
Serial-Num
----------
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
Port Troubleshooting Commands
9-14.
9-14.
9-14.
9-16.
9-16.
9-16.
Status
ok
9-11