Placing Listing Keys In Ibox Devices; Showing Hours; Place Listing Keys In Ibox Devices - Supra ActiveKEY User Manual

Placing Listing Keys in iBox Devices

The classic iBox key container holds up to three (3) listing keys. The iBox BT and iBox BT LE key
containers holds up to five (5) listing keys or two (2) gate cards and two (2) keys. Before closing the key
container, verify that all items are well inside and the front is not bowing or bulging out. Listing agents
should always make sure there is a spare set of listing keys before closing the key container.
Caution: Do not place ID tags, key rings, or loose objects in the key container. They can jam the container.
To close the key container, turn the key container to face you, see the figure below. Insert the key
container into the bottom of the iBox and push up until it closes.
Figure 14. Key Container

Showing Hours

The iBox device can be programmed to allow 24-hour access or timed access for specific hours.
To determine the timed access hours programmed into the iBox, contact your Association or MLS.
Showing hours are in standard time. If the area observes daylight saving time, the actual access hours
are one (1) hour later than the hours set in the iBox or iBox BT during daylight saving time. For example,
if an iBox, iBox BT, or iBox BT LE is programmed for access from 8 a.m. to 9 p.m. Standard Time, during
daylight saving time, the actual showing hours are 9 a.m. to 10 p.m.
Activate or deactivate timed access in an iBox device:
1. Press on/off to turn on the ActiveKEY.
2. Scroll to the SET IBOX TIMED ACCESS menu option and press enter.
3. Press 1 to activate timed access hours or 2 to activate 24-hour access.
4. Enter the iBox shackle code and press enter. The ActiveKEY powers down in five (5) minutes.
5. Point the ActiveKEY at the infrared lens on the front of the iBox device to program the new setting.
Chapter 3 13
iBoxes