Supraweb Login; Activekey Alert - Supra ActiveKEY User Manual

SupraWEB Login

You can manage your key when you log into SupraWEB. For more information on how to register to log
into SupraWEB, refer to the
click the Customer Support link at the top navigation bar and SupraWEB Resources.
To log into SupraWEB:
1. Go to www.supraekey.com.
2. Select SupraWEB Login for Real Estate Agents.
3. Enter your Single Sign-On (SSO) number and four-digit PIN code.
Note: The first time you login with your user ID and password, your key serial number, PIN, and Board/
Association (select from a dropdown list) are required.
4. Click Login.

ActiveKEY Alert

The ActiveKEY Alert feature uses the ActiveKEY's wireless capability to send a preset email message
with just the press of a button. Select up to three (3) contacts and the text of the email message ahead
of time.
Enable the ActiveKEY Alert feature:
1. Log into SupraWEB.
2. Select the ActiveKEY Alerts link.
Note: The first time the link is selected the terms and conditions and license agreement pops up to
either accept or deny.
3. Verify your email address.
4. Click the Enable Service button.
5. Enter contact information for up to three (3) people.
6. Edit the default message or enter a new message up to 100 characters.
7. Click Save.
Once the contacts are set up, a notification is emailed to each of the contacts on the list. The email
notification to the contacts includes a link for them to opt out. When a contact opts out, an email is sent
to you informing you that one of your contacts has been removed.
To send an Alert message, press and hold the S button for three (3) continuous seconds.
The ActiveKEY displays: SENDING ALERT...
Once complete, the ActiveKEY displays ALERT DONE and the backlight on the ActiveKEY flashes to let you
know your alert message has been emailed to your contacts.
SupraWEB Single Sign-On Instructions available at www.supraekey.com,
Chapter 1 6
Introduction