SMA SUNNY BOY 2000HF-US Installation Manual page 5

SMA America, LLC
Other Symbols in this document
In addition to the safety and hazard symbols described on the previous pages, the following symbol
is also used in this installation guide:
Information
This symbol accompanies notes that call attention to supplementary information that you
should know and use to ensure optimal operation of the system.
General Warnings
General Warnings
All electrical installations must be done in accordance with the local and
National Electrical Code
CSA C22.1. This document does not and is not intended to replace any local, state,
provincial, federal or national laws, regulation or codes applicable to the installation and
use of the inverter, including without limitation applicable electrical safety codes. All
installations must conform with the laws, regulations, codes and standards applicable in
the jurisdiction of installation. SMA assumes no responsibility for the compliance or
noncompliance with such laws or codes in connection with the installation of the inverter.
For all repair and maintenance always return the unit to an authorized SMA Service
Center.
Before installing or using the RS485-Quick Module, read all of the instructions, cautions,
and warnings on the RS485-Quick Module in this installation guide.
Installation Guide
®
ANSI/NFPA 70 or the Canadian Electrical Code
Important Safety Instructions
RS485-QM-IA-eng-IUS111610
®
5