SMA SUNNY BOY 2000HF-US Installation Manual page 17

SMA America, LLC
In order for all inverters in your plant to be detected by your communication device, all inverters must
have the same NetID. To assign a NetID, proceed as follows:
1. Using a screwdriver of switch
the arrow on the right rotary switch (C) to the
required position.
Saving the Bluetooth settings
The Bluetooth settings will first be accepted upon inverter commissioning.
Installation Guide
1
⁄ in. (2.5 mm), set
8
Preparations for the RS485-Quick Module
RS485-QM-IA-eng-IUS111610 17