NEC LS2400 Service & Reference Manual page 172

System Event Log (SEL) Window
The SEL displays information on the events stored in the system
log area. The information stored includes the name of the event,
the date and time the event occurred and data pertinent to the
event. Event data may include POST error codes that reflect
hardware errors or software conflicts within the system.
Note: Refer to Chapter 5, "Problem
Solving" for definitions on all POST error
codes
1. From the SSU Main Menu, launch the SEL by selecting the
"SEL Viewer Add-in" task under the SEL heading in the task
box. Click OK. The SEL Viewer Add-in window (Event Log)
displays.
2. The following screen choices are available:
Screen Choice
File Menu
View Menu
Settings menu
B-14 System Setup Utility
Description
Loads, saves and clears the Event Log data. The
Event Log data file is saved in either text or
binary format depending on the output format
selected under the Settings menu. Selecting Exit
returns you to the SSU Main Menu.
Views all events, events by sensor type, or
events by event type. The Event Log data file is
viewed in either text or binary format depending
on the display format selected under the
Settings menu.
Events are displayed and saved either in Hex
codes (binary format) or as text. Select "Display
Hex" to view Hex or "Display Verbose" to view
text. Select "Output Binary" to save log data in
Hex or "Output Text" to save log as text. Note:
Only files saved in binary format can be viewed
using the SSU SEL utility.