Quick Throttle - JR Racing R-1 User Manual

Quick Throttle

The quick throttle feature is used to reduce/eliminate the
dead throttle area that exists at neutral to the starting point of
throttle and from neutral to the starting point of braking.
This area is sometimes known as dead band. As more throt-
tle trim (also known as static brake) is applied, more of the
dead trigger area right off neutral exists. Adjust a forward
value such that your vehicle's wheels just start to turn when
indicates the direction
selected
Press the MODELIST key
to return to Direct Mode
Press the UP key to go to
Idle Up
Press the CLR key to
reset value to factory
setting (0%)
36
the trigger is slightly squeezed. This gives the most accurate
feel and eliminates this dead area.
In Function Mode, access the Quick Throttle function by
moving the cursor to QUICK TH. and pressing the MODE
LIST key.
[QUICK TH.]
∞Forward 0%
Brake 0%
Experiment with brake values. You may want a higher than
normal initial braking. If so, adjust a higher value on the
brake side.
Programmed values for
both forward and brake
Press the + or – keys to
increase or decrease quick
throttle values
Press the DOWN key to go
to Timer