Throttle Deadband - JR Racing XR3i Quick Start Setup

4680 JR XR3i manual 7/17/02
Throttle Deadband (Function Mode)
The throttle deadband feature is used to reduce/eliminate the
dead throttle area that exists at neutral to the starting point of
throttle and from neutral to the starting point of braking. This
area is sometime known as deadband. As more throttle trim
(also known as static brake) is applied, more of the dead
trigger area right off neutral exists. To eliminate the throttle
deadband, adjust a forward value such that your vehicle's
wheels just start to turn when the trigger is slightly squeezed.
This provides the most accurate feel and eliminates the dead
area in the throttle. To eliminate the braking deadband,
adjust the brake value such that your vehicle starts to slow
down when the trigger is slightly pushed. This provides
the most accurate brake feel and eliminates the dead area
when braking.
tdb
0 ∞
L/F
tdb
0 ∞
R/B
Values: 0% to 100%
Clear = 0%
22
12:14 PM Page 22
Accessing the Throttle
Deadband function
Press the Scroll key
until "TDB" appears on
the screen.
Press the Increase or Decrease key to select the
desired value necessary.
1. Turn the transmitter power switch on.
Forward Adjustment
2. Press the Scroll key to access Function mode.
(depends on
trigger position) 3. Press the Scroll key until "TDB" appears on the screen
4. Move the trigger accordingly to adjust the forward or
Current Value
5. Press the Increase or Decrease key to select the desired
6. Press the Scroll key to access the Exponential function.
7. To exit the Function mode, either turn off the transmitter
Brake Adjustment
(depends on
trigger position)
Current Value
ENTER
SCROLL CHANNEL
CLEAR
INCREASE DECREASE
braking deadband.
value necessary to eliminate dead area.
power switch or press the Scroll and Channel keys at the
same time.