Travel Adjust - JR Racing R-1 User Manual

Travel Adjust

Travel adjust, also referred to as endpoint adjust or travel
volume, allows the precise maximum servo throw in either
direction to be independently adjusted. The travel adjust
range is from 0–150% (0 to 60 degrees servo travel). This is
used to set the maximum right/left steering and high full
Indicates channel to adjust
Note: ST = Steering
THRO = Throttle
AUX = Auxiliary channel 3
Travel Adjust value in each
direction
Press the MODELIST key to
return to Direct Mode
Press the UP key to go to
Sub-Trim
Returns value to 100%
Note: Steering Travel Adjust (ST)—To independently
adjust the left (L) or right (R) travel adjustment,
turn the wheel in the direction you wish to adjust
and the opposite cursors will be removed.
28
brake positions independently. Remember, dual rate and
brake trimmers work in unison with travel adjust.
In Function Mode, access the Travel Adjust function by
moving the cursor to TRVL ADJ and pressing the MODE
LIST key.
[TRVL ADJ]
ST. THRO
∞L 100% F 100%
∞R 100% B 100%
AUX.
+ 100%
- 100%
Note: Throttle Travel Adjust (THRO)—To independently
Press the + or – keys to adjust
the Travel Adjust values
Press the SEL key to select the
desired channel
Press the DOWN key to go to
Throttle Hold
adjust the forward (F) or Brake (B-reverse) travel
adjustment, move the throttle trigger in the direc-
tion you wish to adjust and the opposite cursor
will be removed.