Sub-Trim - JR Racing R-1 User Manual

Sub-Trim

Sub-trim allows you to electronically adjust the centering of
your servos. Sub-trim is available for all three channels and
is adjustable from 0–125% (+ or - 30% of servo travel).
Indicates selected channel
Sub-trim values
Press the MODE LIST key
to return to Direct Mode
Press the UP key to go to
Dual Rate/Exponential
Press the CLR key to zero
out the sub-trim value
Note: Do not use excessive sub-trim as it's possible to
over-run the servo's travel.
In Function Mode, access the Sub-Trim function by moving
the cursor to Sub Trim and pressing the MODE LIST key.
[Sub Trim]
∞ ST. THRO
0
AUX.
Note: Sub-trim changes both the center and the end
0
0
Press the + or – keys to
adjust the Sub-Trim
value—range: 0-125%
Press the SEL key to move
the cursor to the desired
channel
Press the DOWN key to go
to Travel Adjust
point servo positions (right and left). You may
want to recheck your endpoint positions if you
adjust the sub-trim.
27