Fail-Safe - JR Racing R-1 User Manual

Fail-Safe

(only available when PCM is activated)
In PCM modulation, a fail-safe function is available that will
cause the servos and speed controller to assume either a
preset fail-safe position (normally full brakes and straight
steering) or to hold the last position when radio interference
is encountered.
Fail-Safe
Hold
Press the UPkey to go to
Modulation
Press the DOWNkey to go
to Data Transfer
Storing Fail-Safe
SPCM Only
Indicates stored fail-safe
position
ZPCM Only
SPCM Only
Select the desired channel you wish to use with the fail-safe
feature by moving the arrow above that channel using the
SEL key. Use the + or - key to select F.S. or HOLD. Now
20
Using the SEL key, you can set each of the three channels to
the fail-safe or the hold function.
In System Mode, access the Fail-Safe function by moving
the cursor to Fail Safe and pressing the MODE LIST key.
[Fail Safe]
MODEL 1
¢
ch ST. TH. AUX.
F.S.
HOLD
[Fail Safe]
MODEL 1
¢
ch ST. TH. AUX.
F.S.
HOLD
Pos. 0 MEMORY
[CLR]key
[Fail Safe]
MODEL 1
HOLD
move the channel's stick or wheel for which you selected
fail-safe in the position of the desired fail-safe.
Indicates selected channel
Press the + or – keys to
select Fail-Safe (F.S.) or
Hold for the selected
channel
Press the SEL key to select
the desired channel
[CLR] key only appears when
one or more channels are
selected to F.S.