Idle Up - JR Racing R-1 User Manual

Idle Up

The idle up function is normally used to advance the throttle
position slightly, making it easier to start gas cars. When
turned on, the throttle servo will offset to the pre-
programmed position, and "on" will appear on the right side
of the idle up screen.
Idle Up position:
F = Forward
B = Brake
Press the MODE LISTkey to
return to Direct Mode
Press the UP key to go
to A.B.S. braking
Press the CLR key to
reset to inhibit
In Function Mode, access the Idle Up function by moving
the cursor to IDLE UP and pressing the MODE LIST key.
[IDLE UP]
THRO ON
F 5
Indicates Idle Up is on
Indicates throttle Idle Up
postion
Press the + or – keys adjust the
idle up position
Press the DOWN key to go
to Quick Throttle
35