Table of Contents
Advertisement
27. Use
recommended
accessories may be hazardous.
28. Maintain tools with care. Keep tools sharp and
clean for the best and safest performance.
Follow instructions for lubricating and changing
accessories.
29. Turn off the machine before cleaning. Use a
brush or compressed air to remove chips or
debris — do not use your hands.
30. Do not stand on the machine. Serious injury
could occur if the machine tips over.
31. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
32. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious, or possibly even fatal,
injury.
accessories;
improper
33. Don't use in dangerous environment. Don't use
power tools in damp or wet location, or expose
them to rain. Keep work area well lighted.
34. Use proper extension cord. Make sure your
extension cord is in good condition. When using
an extension cord, be sure to use one heavy
enough to carry the current your product will
draw. An undersized cord will cause a drop in
line voltage resulting in loss of power and
overheating. Table 6-1 (sect. 6.3) shows the
recommended size to use depending on cord
length. If in doubt, use the next heavier gage.
The smaller the gage number, the heavier the
cord.
3
Advertisement
Table of Contents
