Installation and Interconnections
VL-1000 Linear Amplifier Interconnections
Be sure that both the FT-991A and VL-1000 are turned off, and then follow the installation recommendations contained
in the illustration.
Note:
Refer to the VL-1000 Operating Manual for details regarding amplifier operation.
Do not attempt to connect or disconnect coaxial cables when your hands are wet.
Set the Menu item "141 TUNER SELECT" to "LAMP".
Since the ALC cable is connected to the REM/ALC jack, the optional FH-2 cannot be connected.
144/430MHz Antenna
DC 13.8 V
Page 18
Coaxial Cable (50Ω)
Connect to "INPUT 1" of the VL-1000
HF/50MHz Antenna
CT-58 Band Data Cable (Option)
CT-58 ALC Cable (Option)
Set the front panel's
INPUT switch to the
"INPUT1".
To link the FT-991A and VL-
1000 Power switches, set the
VL-1000 REMOTE switch to
the "ON" position.
F T-991 Operating Manual