Reading Parameter Areas; List Of Parameter Area Read Commands - Omron ZFV-C Command Reference Manual

Reading Parameter Areas

The following describes reading of parameter areas.

List of Parameter Area Read Commands

Data name MRC SRC
Current bank 02h 01h
No.
Reading 02h 01h
processing
unit data
*1 This refers to the ASCII character length. For details, refer to p.2-2.
For details on the unit No. and parameter No. of each processing unit, refer to "Section 3
- Unit Nos. and Parameter Nos."
Example 1: To read the current bank No. from a 2CH controller, assign a command as follows:
[Machine No.]=0002h
MRC SRC Parameter type
02h 01h 8000h
Example 2: To read the judgment result from a 1CH controller, assign a command as follows:
[Data No.]=00h, [Unit No.]=02h, [Machine No.]=0001h
MRC SRC Parameter type
02h 01h C000h
Parameter Read start
type address
8000h <Machine No.>
C000h+ XXYYh
<Parameter (XX: <unit No.>,
No.> YY: <machine
No.>)
Read start address
0002h
Read start address
0201h

Reading Parameter Areas

Specification
of number of Data to be read
elements
8001h Bank No.
8001h Data to be read
Number of
elements
8001h
Number of
elements
8001h
CompoWay/F Communication Command Reference
Section 2
Data
length
*1
16
32
ZFV-C
2-3