Commands And Responses - Omron ZFV-C Command Reference Manual

Section 2
Reading Parameter Areas

Commands and Responses

●
Command
MRC
"02"
2 bytes
Parameter type
Read start address
Number of elements
ZFV-C
2-4
CompoWay/F Communication Command Reference
SRC Parameter type
"01"
2 bytes 4 bytes
Element
Specify parameters corresponding to the data to be acquired.
Specify the machine No. (i.e. CH No.) of the controller to read data from by
using an ASCII code expressed in hexadecimal.
Note that the format in the case of a "processing unit data read" command is
XXYYh (where, XX: unit No., YY: machine No.)
Specify the number of elements corresponding to the parameter type.
Read start address
4 bytes
Description
List of Parameter Area Read Commands, p.2-3
Unit Nos. and Parameter Nos., p.3-1
List of Parameter Area Read Commands, p.2-3
Number of elements
4 bytes