Omron ZFV-C Command Reference Manual page 22

●
Response
MRC SRC
"30" "05"
2 bytes 2 bytes
Element
Response code
Instruction code
Related information 1
Related information 2
Response code for a normal end
Response code
"0000" Normal end
Response codes when an error occurs
Response code
"1001" Long command length
"1002" Short command length
"1101" Area type error
"1103" Start address outside of range
error
"2203" Operating error
"2204" Operating error
"2205" Operating error
Response Instruction
code code
4 bytes 2 bytes
Indicates the controller status for the command.
A code the same as the transmitted code is returned.
Name
No errors occurred.
Error name
The command is too long.
The command is too short.
The instruction code is wrong.
The related information specifies the sensor of an
unconnected machine No.
The setting is abnormal. For details on error conditions,
refer to the ZFV-C User's Manual.
The sensor's operating mode is other than RUN.
This is an invalid command.
Operation Instructions
Related Related
information 1 information 2
2 bytes 4 bytes
Description
Description
Cause
CompoWay/F Communication Command Reference
Section 2
ZFV-C
2-11