Volume Keys - Gigaset E560 A User Manual

Getting to know your telephone

Volume keys

During a call or when listening to a message, set the volume for the receiver/headset or speaker
or in the case of an incoming call, set the volume of the ringtone (5 levels).
¤
Press the volume keys on the right side of the handset:
(louder) /
The current setting is permanently saved after approx.
two seconds (
Extra-loud function
¤
Press the top volume key
level.
The extra-loud setting only applies for the duration of the call.
•
This setting can result in harm to health in persons with a normal hearing ability
and is only intended for persons with a hearing impairment or reduced hearing.
•
Disruptive noises on the phone line can be increased.
Direct dialling keys A to D
You can save important phone numbers that you call often to the four direct dialling keys. You
can assign an external phone number to each direct dialling key.
To dial these saved numbers, press the relevant direct dialling key
on the base.
You can also assign the emergency function to direct dialling key
Assigning a function to direct dialling keys
Prerequisite: The direct dialling key in question has not already been assigned a function.
¤
In idle status, press the direct dialling key (
assign a function.
Select the relevant function using
¤
Label with Ext. No.
¤
Label with Internal Call
If more than one other handset is registered:
¤
Label with Call All Int.
¤
Label with Dir. Number Label the key with a number from the directory. The directory is
The labelling of the direct dialling keys applies to the handset and the base.
12
(quieter)
p. 43).
until you reach the highest
:
Enter an external phone number directly.
¤
Enter the number and press OK.
¤
Enter the name and press OK.
Direct dial to a handset registered to the same base.
Direct dial to all handsets registered to the same base.
opened.
to ) on the handset to which you wish to
Select handset
Select a number and press OK.
Volume:
Back
to on the handset or
( p. 24).
OK
OK