The Gigaset C330/330 A Base; Using The Base; Control Key; Keys On The Keypad - Gigaset C330 Manual

Gigaset C330/330 A / CHN en/ A31008-M2307-Y101-1-7619 / BS_using.fm / 22.03.2013

Using the base

The Gigaset C330/330 A base

Using the base

Control key

Below, the side of the
control key you need to
press in the respective
operating situation is
marked by an arrow
(top, bottom, right, left), e.g. v for "press
right on the control key" or t for "press at
the top of the control key".
The control key has a number of different
functions:
When the base is in idle status
s
v
u
In the menu
v or u Navigate to the required func-
In lists
t / s
During a call
s
u / v
16
Open the directory.
Increase the ringer volume.
Decrease the ringer volume.
tion.
Scroll up/down line by line.
Open the directory.
Adjust the loudspeaker volume
for earpiece and speaker mode.

Keys on the keypad

# / Q / G etc.
Press the matching key on the
keypad.
~
Enter digits or letters.
Activating/deactivating the
keypad lock
The keypad lock prevents any inadvertent
use of the phone.
#
Press and hold the hash key in
idle status to activate or deacti-
vate the keypad lock. You will
hear the confirmation tone.
If the keypad lock is activated, the
bol is displayed and a warning tone will be
emitted when you press a key.
The keypad lock deactivates automatically
when you receive a call. It is reactivated
when the call is ended.
Please note
When the keypad lock is active, you can
call emergency numbers only by using
the receiver at the base.

Reverting to idle status

You can revert to idle status from anywhere
in the menu as follows:
¤
Press the back key B.
Or:
¤
Do not press any key: after 2 minutes the
display will automatically revert to idle
status.
Or:
¤
Briefly lift the corded handset.
˝
sym-