Gigaset E560 A User Manual page 46

Handset settings
Activating/deactivating the ringer
You can:
•
Permanently deactivate the ringer in idle status or when receiving a call
•
Deactivate the ringer for the current call only.
The ringer cannot be re-activated while a call is in progress.
Deactivating the ringer perma-
nently:
Reactivating the ringer:
Deactivating the ringer for the
current call:
Activating/deactivating visual call signal
Incoming calls are signalled visually (e.g. in noisy environments).
¤
Menu Settings
OK ( = activated)
Advisory/warning tones
Your handset uses advisory tones to tell you about different activities and statuses. The following
tones can be activated and deactivated independently of each other:
•
Advisory Tones
•
Key click: Every key press is confirmed.
•
Confirmation tone (rising tone sequence): At the end of an entry/setting, when the hand-
set is placed in the base and on arrival of a new entry in the answer machine list or the call
list.
•
Error tone (descending tone sequence): When you make an incorrect entry.
•
Battery Low
The battery requires charging.
•
Out of Range Signal
The handset is no longer in range of the base.
You cannot deactivate the confirmation tone for placing the handset in the base.
Activating/deactivating advisory tones
¤
Menu Settings
OK ( = on)
Activating/deactivating battery low beep
¤
Menu Settings
OK ( = on)
44
¤
Press and hold the star key
the display
¤
Press and hold the star key
¤
Press the Silence display key.
OK Audio/Visual Signals
OK Audio/Visual Signals
OK Audio/Visual Signals
. . . . he icon appears in
.
OK LED Call Signal
OK Advisory Tones
OK Battery Low