Service; Specific Safety Rules For Dust Extractors; Respiratory Exposure Safety Warnings; Dust Extractor Overview - Festool CT Mini Instruction Manual

Hide thumbs Also See for CT Mini:
Table of Contents

Advertisement

conditions and the work to be performed. Use of the power
tool for operations different from those intended could result
in a hazardous situation.

Service

Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that

Specific Safety Rules for Dust Extractors

The dust extractor uses a 3-prong grounded plug. Never
connect the dust extractor to an ungrounded electrical outlet.
Never defeat or bypass the ground prong. Do not use the
dust extractor if the ground prong is broken or missing.
Take care when using the dust extractor on stairs or elevated
work areas.
Do not vacuum toxic, carcinogenic, combustible or other
hazardous materials such as asbestos, arsenic, barium, beryl-

Respiratory Exposure Safety Warnings

Substantial or repeated inhalation of dust and other airborne
contaminants, in particular those with a smaller particle size,
may cause respiratory or other illnesses. Various dusts created
by power sanding, sawing, grinding, drilling and other construc-
tion activities contain chemicals or substances known (to the
State of California and others) to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals/
substances are: lead from lead-based paints; crystalline silica
from bricks, cement, and other masonry products; arsenic and
chromium from chemically-treated lumber; and some wood

Dust Extractor Overview

Intended Use

The dust extractor is designed for use for the suction and
evacuation of non-noxious dusts, dirt, sand, shavings etc.,
for both dry and wet conditions. With the appropriate filter
and collection configuration, this dust extractor may be used
for vacuuming water. The dust extractor is designed for both
household and commercial use, and for both workshop and
household applications.

Technical Specifications

Power Consumption
Max Connected Load
Maximum Air Flow
Maximum Vacuum
Sound
Filter Surface
Dimensions:
L x W x H
430 x 330 x 420
mm / inch
16.9 x 13.0 x 16.5
Weight
8.7 kg (19.2 lb) 9.0 kg (19.8 lb) 13 kg (28.6 lb) 13.5 kg (29.7 lb)15.2 kg (33.5 lb)16.2 kg (35.9 lb)
Collection Capacity
10 L (2.6 gal)
Ingress Protection
These specifications are subject to change without notice.
Supplemental Owner's Manual
CT Mini
CT Midi
400-1200 W
222 m�/h (130 cfm)
0.5 m� (5.4 ft�)
430 x 330 x 470
16.9 x 13.0 x 18.5
15 L (3.9 gal)
To reduce the risk of serious injury, never alter or misuse the
power tool.
the safety of the power tool is maintained.
lium, lead, pesticides or other health endangering materials.
Do not pick up anything that is burning, smoldering, or smok-
ing, such as cigarettes, matches or hot ashes.
Do not use to pick up flammable or combustible liquids, such
as gasoline, or use in areas where they may be present.
Take care when disposing of fine sanding dust. Fine particle
dust may become explosive. Do not throw sanding dust on an
open flame.
dusts, especially from hardwoods, but also from some soft-
woods such as Western Red Cedar.
The risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area and use a properly
functioning dust extraction system. When the inhalation of
dust cannot be substantially controlled, i.e., kept at or near the
ambient (background) level, the operator and any bystanders
should wear a respirator approved by NIOSH for the type of
dust encountered.
The dust extractor should not be altered or used for any
other purpose, other than as specified in these operating
instructions. Using the tool in contravention to this manual
will void your warranty and may lead to injury. The user
shall be responsible and liable for damages and accidents
resulting from misuse or abuse of this dust extractor.
CT 26 E
CT 36 E
1200 W
234 m�/h(138 cfm)
24 kPa (3.48 psi)
62-72 dB(A), (IEC 60704-2-1)
x
x
x
630
365
540
630
365
x
x
x
24.8
14.4
21.3
24.8
14.4
26 L (6.9 gal)
36 L (9.5 gal)
IPx4
CT 36 AC
350-1200 W
0.6 m� (6.8 ft�)
x
x
x
596
630
365
596
x
x
x
23.5
24.8
14.4
23.5
36 L (9.5 gal)
CT 48 E
x
x
740
406
1005
x
x
29.1
16.0
39.6
48 L (12.7 gal)
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ct midiCt 26 eCt 48 eCt 36 acCleantex ct 36 e ac

Table of Contents