Hose And Cord Storage; Systainer Storage; Using The Parking Brake - Festool CT Mini Instruction Manual

Hose and Cord Storage

All CT-series vacuums have integral hose and cord storage
in the top of the vacuum, called the hose garage. The hose
garage permits the power cord and vacuum hose to be
stored in the top while simultaneously allowing for a tool's
Systainer to be stacked on top of the vacuum (see below).
The hose garage has a slot in the rear for the power cord
to pass through, and a slot in the front for the hose to pass
through. (Also refer to page 12
Power Cord Bracket.)
Power
Cord Slot

Systainer Storage

All of the CT-series vacuums allow for storage and trans-
portation of Systainers on top of the Vacuum. The latches
accommodate both new T-Lok and older latch style
Systainers. The CT-Mini and CT-Midi mount a T-lok style
Systainer differently than the larger vacuums, and have a
T-lok handle for securing them.
For Latch
Style
For T-Lok

Using the Parking Brake

All CT-series vacuum have a parking brake to keep the
vacuum stationary when you don't want it to move.
To activate the brake, press down on the brake foot until
►
the front wheels are off the ground.
To release the brake, press in on the brake release button.
►
Supplemental Owner's Manual
for installing the optional
Style
Hose Slot
B
A
Brake
Release
Brake
Foot
11