Service And Maintenance; 10 Environment - Festool CT 15 E Original Instructions Manual

CAUTION
Hazardous dust
Damage to the respiratory passage
► After extracting wet materials, remove the
wet filter and replace it with the main filter
for dry materials.
CAUTION
Escaping foam and fluids
► Switch off and empty the machine immedi­
ately.
8.3 Blow-out function
► Open the grille in front of the exhaust open­
ing [1-8].
► Insert the suction hose in the exhaust open­
ing [1-8].
► In standby mode, press the MAN but­
ton [1-11].
8.4 Changing the filter bag with minimal
dust
► Open the locking clips and remove the top
section of the machine [2].
► Pull the tab on the filter bag until the filter
bag opening is fully closed.
The filter bag is now securely closed and can be
removed.
► Fit the top section of the machine and close
the locking clips.
8.5 Changing the filter element [6]
► Pull out the used filter drawer [1-6].
► Dispose of the used filter drawer in accord­
ance with statutory regulations.
► Insert the new filter drawer [1-6].
Order numbers for accessories, filters and
consumables in the Festool catalogue or
online at "www.festool.com".
Only use original Festool accessories and
–
consumables. Only accessories tested and
approved by Festool are safe and perfectly
adapted to the machine and application.
NOTICE
Damage to the motor
► Never extract material without a main filter
or with a damaged main filter, as this can
damage the motor.
8.6 After finishing work
► Switch off the mobile dust extractor and
pull out the mains plug.
► Vacuum and wipe the inside and outside of
the mobile dust extractor to clean it.
► Empty the dirt trap.
► Wind up the mains power cable.
► Place the mains power cable [4-1] in the
sealable depot. To do so, lay the power ca­
ble through the recess [4-2].
► Disconnect the suction hose [5-1] and fix it
to the mobile dust extractor using the suc­
tion hose attachment [1-3].
► Regularly clean the fill level sensors [7-1]
and check for damage.
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
The lid of the depot also serves as a stor­
age area for tools.
9

Service and maintenance

WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
WARNING
Incorrect testing may damage the machine
and injure users
► Special information is required for testing
the electrical safety. This is available from
your country's Festool service workshop.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festool.co.uk/service
5
3
2
1

10 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
English
13