Items Supplied; Operation - Silvercrest SHTR 2200 E3 Operating Instructions Manual

__NAS278227_Haartrockner_B6.book Seite 6 Mittwoch, 28. September 2016 1:23 13
DANGER! Risk of injury
through burning
Do not direct the flow of hot air into
eyes, onto hands, or onto any other
heat-sensitive body parts.
Do not touch the hot surfaces of the de-
vice.
Allow the device to cool down com-
pletely before you clean it or put it
away.
Allow all attachments to cool down be-
fore removing it from the device.
WARNING! Risk of material damage
Only use the original accessories.
Never place the device on hot surfaces
(e.g. hob plates) or near heat sources or
open fire.
Do not use any astringent or abrasive
cleaning agents.
Do not expose the device to tempera-
tures below -10 °C or above +40 °C.

4. Items supplied

1 hair dryer
1 styling attachment 11
1 diffuser 12
1 curling attachment 13
1 set of operating instructions
Attachment per model:
- grey hair dryer
Diffuser 12, styling attachment 11
- blue hair dryer
curling attachment 13, styling attach-
ment 11
- purple hair dryer
Diffuser 12, styling attachment 11
6
GB

5. Operation

NOTE:
• before using for the first time, switch the
device on for a few minutes and allow it
to run at the highest speed and tempera-
ture settings. As a result of the manufac-
turing process, you may notice a slight
odour. This is normal and only occurs
during first use. Ensure that the room is
well ventilated.
Switching on/off and adjusting
speed
1. Connect the mains plug 5 with an easi-
ly accessible wall socket.
2. Using the on/off switch 7 and the
switch for the speed settings, you can
switch the device on and select the de-
sired speed for the air flow:
0 = off
= slow; gentle air flow
= fast; strong air flow
3. After drying, switch the on/off switch 7
to 0 (off) and pull out the mains plug 5.
Selecting the temperature
Use the switch for the hot air settings 8 to se-
lect the desired temperature for the air flow:
= low temperature
= medium temperature
= high temperature
Cooling function
In order to improve the durability of your
hair style, you can cool the hair after it has
been styled with hot air using the but-
ton 9 .
Keep the button 9 held down during dry-
ing in order to get a cool air flow, irrespec-
tive of the starting temperature.
When you no longer require the cool air
flow, release the button 9 .