Items Supplied; Operation - Silvercrest SHTP 2100 A1 Operating Instructions Manual

BB*5$B+DDUWURFNQHUB%ERRN 6HLWH  'RQQHUVWDJ  -DQXDU    
DANGER! Risk of injury
through burning!
~ Do not direct the flow of hot air into
eyes, onto hands, or onto any other
heat-sensitive body parts.
~ Do not touch the hot surfaces of the de-
vice.
~ Allow the device to cool down com-
pletely before you clean it or put it
away.
~ Allow all attachments to cool down be-
fore removing it from the device.
WARNING! Risk of material
damage
~ Only use the original accessories.
~ Never place the device on hot surfaces
(e.g. hob plates) or near heat sources or
open fire.
~ Do not use any astringent or abrasive
cleaning agents.
~ Do not expose the device to tempera-
tures below -10 °C or above +40 °C.

4. Items supplied

1 hair dryer
1 styling attachment 11
1 diffuser 1
1 set of operating instructions
16 GB

5. Operation

NOTE: before using for the first time, switch
the device on for a few minutes and allow it
to run at the highest speed and temperature
settings. As a result of the manufacturing
process, you may notice a slight odour. This
is normal and only occurs during first use.
Ensure that the room is well ventilated.
Switching on/off and adjusting
speed
1. Connect the mains plug 5 with an easi-
ly accessible wall socket.
2. Using the on/off switch and the switch
for the speed settings
switch the device on and select the de-
sired speed for the air flow:
0 = off
1 = slow; low air flow
2 = fast; strong air flow
3. After drying, switch the on/off
switch 9 to 0 (off) and pull out the
mains plug.
Selecting the temperature
Use the switch for the hot air settings
to select the desired temperature for the air
flow:
= low temperature
= medium temperature
= high temperature
Cooling function
In order to improve the durability of your hair
style, you can cool the hair after it has been
styled with hot air using the button
Keep the button 10 held down during
drying in order to get a cool air flow, irre-
spective of the starting temperature.
When you no longer require the cool air
flow, release the button
9, you can
8
10.
10.