Ordering; Accessories; Technical Data - Siemens LAL1.25 Manual

Ordering

Accessories

Technical data

General unit data LAL...
Plug-in base AGM...
Environmental
conditions
6/20
Siemens Building Technologies
HVAC Products
When ordering, please give full type reference according to «Type summary».
Plug-in base
- With Pg11 threads for cable entry glands
- With M16 threads for cable entry glands
Mains voltage
- With LAL1... / LAL2... / LAL3... incl.
Mains frequency
Unit fuse (built-in)
Primary fuse (external)
Weight
- LAL...
Plug-in base
-
Flame detectors:
- QRB1...
- QRC1...
RAR...
-
Power consumption
Mounting position
Degree of protection
Safety class
Perm. input current at terminal 1
Perm. current rating of control terminals
3, 6, 7, 9...11 and 15...20
Required switching capacity of switching
devices
- Between terminals 4 and 5
- Between terminals 4 and 12
- Between terminals 12 and «LP»
Between terminals 4 and 14
-
- «LP»
Degree of protection
Cable connection
With stranded wires
Transport
Climatic conditions
Mechanical conditions
Temperature range
Humidity
Operation
Climatic conditions
Mechanical conditions
Temperature range
Humidity
Condensation, formation of ice and ingress of water are not permitted!
AC 230 V –15 / +10 %
AC 100 V –15 %...AC 110 V +10 %
50...60 Hz ±6 %
T6,3H250V to DIN EN 60 127
max. 10 A (slow)
approx. 1,000 g
approx. 165 g
refer to Data Sheet 7714
refer to Data Sheet 7716
refer to Data Sheet 7713
approx. AC 3.5 VA
optional
IP 40, when fitted, with the exception of the
connection area (terminal base)
II
max. 5 A (peaks of 20 A / 20 ms)
max. 4 A (peaks of 20 A / 20 ms)
1 A, AC 250 V
1 A, AC 250 V
1 A, AC 250 V
5 A (peaks of 20 A)
5 A
IP 00
screw terminal
cross-sectional area of wire: 0.5...1.5 mm²
use adequate ferrules
DIN EN 60 721-3-2
class 2K2
class 2M2
-50...+60 °C
< 95 % r.h.
DIN EN 60 721-3-3
class 3K5
class 3M2
-20...+60 °C
< 95 % r.h.
AGM410490500
AGM13.1
CC1N7153en
14.10.2002