Warning Notes - Siemens LAL1.25 Manual

Oil burner controls lal1 series; lal2 series; lal4 series
Hide thumbs Also See for LAL1.25:
Table of Contents

Advertisement

Warning notes

2/20
Siemens Building Technologies
HVAC Products
To avoid injury to persons, damage to property or the environment, the following
warning notes should be observed!
Do not open, interfere with or modify the unit!
·
Before performing any wiring changes in the connection area of the LAL..., com-
pletely isolate the burner control from the mains supply (all-polar disconnection)
·
Ensure protection against electric shock hazard by providing adequate protection
for the burner control's connection terminals
·
Check to ensure that wiring is in an orderly state and that the wires are firmly con-
nected
·
Press the lockout reset button / operation button only manually (applying a force of
no more than 10 N), without using any tools or pointed objects
·
Do not press the lockout reset button on the unit or the remote reset button
for more than 10 seconds since this damages the lockout relay in the unit
·
Fall or shock can adversely affect the safety functions. Such units may not be put
into operation, even if they do not exhibit any damage
CC1N7153en
14.10.2002

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lal2.14Lal2.25Lal4.25a27Lal2.65Lal3.25

Table of Contents