Processing Unit Rear Panel - Kustom Signals Raptor RP-1 Operator's Manual

4.3 PROCESSING UNIT REAR PANEL

A. Rear Antenna
B. Front Antenna
C. Speedometer
Input
D. Remote Control
E. Data Port
The radar unit is supplied with a 2-Amp fuse in the power
cable and plug. Any modification to the power cable to
accommodate installation should include a replaceable 2-Amp
fuse to ensure the input power is limited. Removal of the
manufacturer's fuse and not replacing it with a similar fuse will
void the warranty.
SECTION 4—UNIT DESCRIPTION
Connection for rear antenna cable.
Connection for front antenna cable.
Connection for the Speedometer pulse
cable.
Connection for the wired remote
control cable.
RS232 I/O port provides information to
video systems or for updating operating
software. All operations of the Raptor
RP-1 can be controlled via this port.
4.6