Moving Mode - Same Direction - Kustom Signals Raptor RP-1 Operator's Manual

7.4 MOVING MODE – SAME DIRECTION (OPTIONAL
FEATURE)
1. Select the moving mode, same direction by pressing the
SAME/OPP switch on the remote control. The same
direction road graphic indicator will be lit.
2. While driving, observe traffic traveling the same
direction as the patrol vehicle.
3. Complete a tracking history as in Sec 7.2 step 3, and
verify the patrol speed agrees with the speedometer
speed reading.
NOTE: Vehicles traveling at the same rate of speed as the
patrol vehicle will not qualify as targets. The
minimum difference in speed between the patrol
vehicle and the target vehicle is 3 mph (5 km/h).
The maximum difference is 0.65 x Patrol Speed
(65% of Patrol Speed). (For a patrol speed of 50
mph, the maximum difference speed would be 32.
NOTE: If an incorrect Patrol speed is obtained, the
operator can go in and out of HOLD quickly.
This will clear all previous speeds, and a new
patrol speed search will be initiated. See Sec. 7.6
4. The Raptor RP-1 can automatically detect whether the
target vehicle is traveling slower or faster than the
patrol vehicle. There is no need for the operator to
input slower or faster information for same-direction
targets.
SECTION 7—OPERATION
7.12